Solid woven belting

Product Features:

The product consists of solid woven fabric dipped in PVC paste and adding PVC or PVG cover which are combined together by vulcanizing. The belt has good flame resistant and anti-static properties, with high tensile strength in proportion to weight, good integrity and no delimitation, excellent impact and rip resistance. The belt is much suitable to service in the conditions needing fire resistant and antistatic properties as coal mines, power stations, chemical and metallurgy industries.

Note: The following standards are usually applied: DIN22109,AS4606,BS3289,BC158.

PVC stands for the solid woven belt with PVC cover.

Non pressed PVC type is suitable for applications in dry conditions at a slope angle of no greater than 16 degrees. The belt is non-pressed with cover no more than 0.8mm.

Pressed PVC type, both top and bottom covers are PVC, thickness of each side be up to 4mm, the belt has much more advantages than non pressed PVC belt on impact resistance, water soaking, with longer service life, higher fastener holding.

Features:

Low stretch
Low maintenance
Anti-static
Flexible
Lightweight
Impervious to moisture, acids, oils, gases, sunlight
Excellent fastener holding
Excellent resistance to tearing, peeling and impact
Endless belt splicing
Special wear resistant edge design